HP ProLiant ML350 Generation 4p Maintenance And Service Guide

Removal and replacement procedures 21
2. Slide the rail forward and remove it from the server.
3. Repeat steps 1 and 2 to remove other rail.
To replace the component, reverse the removal procedure.
Power supply blank
Loosen the thumbscrew that secures the redundant power supply blank, and then
pull the blank from the back of the server.
Hot-plug power supply
WARNING: To reduce the risk of electric shock, do not
disassemble the power supply or attempt to repair it. Replace it
only with the specified spare part.
CAUTION: Do not attempt to remove and replace a power
supply as a hot-plug procedure unless both bays are populated with
power supplies.
To remove the component:
1. Remove the power cord from the unit to be removed.

HP ProLiant ML350 Generation 4p Specifications

General

Processor Socket	Socket 604
Chipset	Intel E7520
Form Factor	Tower
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Processor	Intel Xeon
Memory	PC2-3200 DDR2 SDRAM
Memory Slots	8
Storage	SAS or SATA (depending on configuration)
Drive Bays	Up to 8 hot-plug drive bays
Network	Embedded NC7782 PCI-X Gigabit Server Adapter
Power Supply	Redundant power supply optional
Expansion Slots	6 total: 2 PCI-Express, 2 PCI-X