HP ProLiant ML350 Generation 4p Maintenance And Service Guide

22 HP ProLiant ML350 Generation 4p Server Maintenance and Service Guide
2. Push down on the power supply release latch, and remove the power supply
from the server.
CAUTION: To prevent improper cooling and thermal damage,
do not operate the server unless all bays are populated with either a
component or a blank.
To replace the component, reverse the removal procedure.
Hot-plug power supply backplane
To remove the component:
1.
Remove the power supplies from the server ("Hot-plug power supply" on
page 21
).
2. Remove the access panel.
3. Disconnect the cables from the components connected to the power supply
backplane.

HP ProLiant ML350 Generation 4p Specifications

General

Processor Socket	Socket 604
Chipset	Intel E7520
Form Factor	Tower
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server
Processor	Intel Xeon
Memory	PC2-3200 DDR2 SDRAM
Memory Slots	8
Storage	SAS or SATA (depending on configuration)
Drive Bays	Up to 8 hot-plug drive bays
Network	Embedded NC7782 PCI-X Gigabit Server Adapter
Power Supply	Redundant power supply optional
Expansion Slots	6 total: 2 PCI-Express, 2 PCI-X