Standard Operation Procedure
Tabulator： Issue Department：
Xin-Xin Chen NPSU-PPE
Auditor ：
Ethan Lai
Steps：
Document No. : Pyxis400 DISASS’Y SOP Station :
Operation Name : Ver. : Date :
Note: If finding anything uncommon, notice foreman or assistant at once.
Fixture list (Specification)
Qty.
Fixture list (Specification)
Qty.
Take out Vesa Mount
8(1/1)
2017/5/23
1.00
1. Unscrew (× 5) all joints of Vesa Mount
illustrated as Fig. 1.
Torsion: 6.0 ± 1.0 kgf.cm
Take the screwdriver vertically to the screw
holes.
Put the screws into the material box.
2. Follow the angle of the red line to take out
Vesa Mount (Fig. 2).
Glove Requirements: Half-finger gloves
Fig. 2
Fig. 1
图一
2
1
4
5
3
Electric Screwdriver (S-6000MS) 1
Bits Type: T15,φ=5mm,L=60mm 1
To Next Page
Loading...
