EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Release 4 Phillips #2 screws then remove roof cover
by hands from top side..
Release 2 Phillips #2 screws then push out ODD kits.
Check hood sensor cable would be remove from hook
of FAN.
Release 3 T15 screws then remove FAN from system.
Release 2 T15 screws then remove option board.
Release 4 T15 screws then remove heat sink.
Unplug Power FFC, Speaker cable and CCD cable
Unplug LVDS FFC cable
Unplug Antenna cable, Back light cable, Hood sensor cable,
HDD FFC cable, Touch cable., Touch cable.
Don’t unplug RTC battery.
To Next Page
Loading...
