reference guide
load originals and load paper
13
set the paper type
If you want to use a different type of paper, such as photo paper, transparency
film, t-shirt transfer paper, or brochures, simply load that paper in the paper tray.
You should then change the paper type settings to ensure the best print quality.
HP recommends paper type settings according to the type of paper you are
using.
This setting refers to copy options only. If you want to set the paper type for
printing, set the properties from the Print dialog box.
•Press the Paper Type button to select Plain or Photo.
To avoid jams, remove papers from the output tray frequently. The output tray
capacity is affected by the type of paper and the amount of ink you are using.
For more information about output-tray capacity, see technical information on
page 29.
Homer.book Page 13 Monday, February 24, 2003 6:03 PM
To Next Page
Loading...