HP PSC 2410 - User Manual

To Next Page

1111

1010

a b

c d

BlackTri-Color

Windows setup poster

Windows Users START HERE Windows Users START HERE

Turn your computer on

Turn on your computer and wait for

the Windows desktop to appear.

Close any open programs.

Begin software installation

Attach front panel cover

Connect power cords

Connect supplied phone cord

Insert the HP PSC Windows CD.

Follow the onscreen instructions.

Remove any packaging material.

Place the front panel cover over the

buttons. Firmly press on all sides to

snap the cover in place. Make sure all

the buttons are visible.

Lift the display.

Load paper

Connect USB cable

Insert and align print cartridges

Turn HP PSC on

You must connect the supplied phone

cord to the phone jack on the left

(1-LINE).

To connect an answering machine or

use your own phone cord, see the Fax

Setup chapter in the Reference Guide.

Make sure the power is on. Lift

the print carriage door up until

it catches. Lift the blue and

gray latches.

Remove the bright pink tape from

both print cartridges. Do not

touch the gold-colored contacts

or retape the cartridges.

Hold the black print cartridge with the

HP label on top. Slide the cartridge

underneath the metal bar into the right

(gray latch) side of the print carriage.

Press down on the gray latch

until it locks into place. Insert

the color cartridge on the left

side, and lock into place.

Make sure both latches are

locked into position. Close

the door.

If the software does not appear on

your computer screen after inserting

the CD, see the Troubleshooting

Information chapter in the Reference

Guide.

Make sure that you see the

screen in step 3 before plugging

in your USB cable. Do not

connect the USB cable to a

keyboard.

After you restart your computer,

the Fax Setup Wizard appears.

Follow the onscreen

instructions. When you see the

Congratulations! dialog

box, you are ready to use your

HP PSC. If you encounter any

problems during setup, see the

Reference Guide.

Turn power on.

Wait for the print cartridge message

to appear, and then continue to the

next step.

Use plain white paper to

prepare for print alignment.

Press OK on the front

panel to begin alignment.

After a page prints,

alignment is complete.

Discard or recycle this

page.

Hardware setup is complete.

Return to your computer. On

the dialog box with the green

checkmark, click Next.

Depending on your system, it

may take 20 minutes or more

to finish installing the software.

www.hp.com/support Copyright Hewlett-Packard Company 2003

Printed in US.

Do not connect the USB

cable yet. When you see the

Setup your Device Now

dialog box, continue to step 4.

Finish software installation

hp psc 2400 photosmart series all-in-one

This side of the poster is for

Windows users. Make sure

you are using the CD and side

of the poster that matches your

operating system.

1-LINE

Q3083 - 90188

*Q3083-90188*

Need help?

Do you have a question about the HP PSC 2410 and is the answer not in the manual?

HP PSC 2410 Specifications

General

Print Technology	Inkjet
Scanner Type	Flatbed
Fax Transmission Speed	33.6 Kbps
Copy Speed (Color)	Up to 14 cpm
Operating Systems Supported	Windows, Mac OS
Weight	17.6 lbs
Functions	Print, Scan, Copy, Fax
Print Speed (Black)	Up to 21 ppm
Print Speed (Color)	15 ppm
Maximum Print Resolution	4800 x 1200 dpi
Connectivity	USB
Copy Speed (Black)	21 ppm
Paper Handling Input	150 sheets
Paper Handling Output	50 sheets
Media Types	Paper (plain, inkjet, photo), envelopes, transparencies, labels, cards