load envelopes
9
hp psc 2200 series
4
Slide the paper-width and paper-length guides in until they stop at the
edges of the paper. Make sure that the paper stack lies flat in the
paper tray and fits under the tab of the paper-length guide.
5
Replace the output tray.
6
To prevent printed paper from falling off the tray, fully extend the
output-tray extender.
load envelopes
Use the print feature of your software to print to envelopes with your HP PSC.
Your HP PSC provides two methods for working with envelopes. Do not use
shiny or embossed envelopes, or envelopes that have clasps or windows.
• If you are printing one envelope, slide the envelope into the envelope
slot, which is located on the right side toward the back of the output
tray. Insert the envelope with the flap up and on the left, as shown in
the illustration. Slide the envelope until it stops.
To Next Page
Loading...
Need help?
General
