HP PSC 2210

maintain your hp psc
52
hp psc 2200 series
2
After the carriage stops moving, lift the latch to release the print
cartridge, then pull it toward you out of its slot.
3
If you are removing the black print cartridge in order to install the
photo print cartridge, store it in the print cartridge protector.
4
Remove the new print cartridge from its packaging and, being careful
to touch only the black plastic, gently remove the plastic tape.
Caution! Do not touch the copper contacts or ink nozzles.
5
Push the new print cartridge into the appropriate slot until it clicks into
place.
The tri-color print cartridge goes on the left and the black or photo
print cartridge goes on the right.
latches