HP PSC 500

1-2
Setting Up Your HP PSC 500
3
Make sure the following items are included with your HP PSC 500:
a
Bi-directional, parallel, IEEE 1284-compliant printer cable with
1284-C connector.
b
Power supply (AC/DC adapter) with attached cord
(HP part number 0950-2880).
c
Power cord.
d
CD-ROM disk(s).
e
Three manuals: HP PSC 500 Setup Guide, HP PSC 500 Basic
Operations Guide, and HP PSC 500 Customer Care Guide.
f
One black and one color print cartridge.
If any of the items are missing or damaged, contact the dealer from whom
you purchased your HP PSC 500.
4
Choose a location and environment for your HP PSC 500.
X
Use your HP PSC 500 only within normal room temperature and
humidity ranges. For recommended ranges, see “Environmental
Specifications” in Chapter 6 of the HP PSC 500 Customer Care
Guide.
X
Avoid direct sunlight or locations where a quick change in
temperature might cause condensation inside the unit.
X
Make sure the location is well ventilated. Dust, gases, or fumes
(such as ammonia or paint thinner) can damage the unit.
X
Choose a site that is level, flat, and stable. The HP PSC 500 vibrates
and needs to be on a sturdy surface.
X
Be sure a grounded outlet is nearby and easily accessible.
g
a
b
c
d
e
f
WLSG.book Page 2 Thursday, March 9, 2000 2:26 PM