18
hp psc 900 series
In the event of problems, you should contact your equipment supplier in the first
instance.
notice to users of
the Irish
telephone
network
This equipment is designed for DTMF tone dialing and loop disconnect dialing. In
the unlikely event of problems with loop disconnect dialing, it is recommended to use
this equipment only with the DTMF tone dial setting.
notice to users of
the German
telephone
network
The HP 900 Series products are designed to connect only to the analogue public-
switched telephone network (PSTN). Please connect the TAE N telephone connector
plug, provided with the hp psc 900 series, into the wall socket (TAE 6) code N. The
hp psc 900 series products can be used as a single device and/or in combination
(in serial connection) with other approved terminal equipment.
geräuschemission
LpA < 70 dB
am Arbeitsplatz
im Normalbetrieb
nach DIN 45635 T. 19
for non-
European
customers
This product is approved for use only in the country in which it was
purchased. Local country laws may prohibit the use of this product outside the
country of purchase. It is strictly forbidden by law in virtually every country to connect
nonapproved telecommunications equipment (fax machines) to public telephone
networks.
VCCI-2 (Japan)
notice to users of
the Korean
telephone
network
To Next Page
Loading...
