use the copy features
28
hp psc 900 series
4 If you want to make more than one copy (the default), press
Options once, then press until the desired number of copies
appear.
Tip! You can also enter the number of desired copies
using the keypad.
5 Press Enter, then press Black or Color.
increase copy
speed or quality
The HP PSC provides three options that affect copy speed and quality.
• Best produces the highest quality for all paper and eliminates the
banding (striping) effect that sometimes occurs in solid areas.
Best copies more slowly than the other quality settings. Best is
automatically selected when you specify the paper type as photo
paper.
• Normal delivers high-quality output and is the recommended
setting for most of your copying. Normal is faster than Best.
• Fast copies faster than the Normal setting. The text is of
comparable quality to the Normal setting, but the graphics may
be of lower quality. Using Fast also cuts down on the frequency
of replacing your print cartridges, because it uses less ink.
1 Load the input tray with the appropriate paper.
2 Load your original on the glass. If you are copying from a Photo
Card, insert the photo card into the appropriate slot.
3 Press Scanner, then press Copy, if not already lit.
4 Press Options until Copy Quality appears.
5 Press until the desired copy quality appears, then press Enter.
6 Press Black or Color.
reduce or enlarge
a copy
You can reduce or enlarge a copy of an original using predefined
settings, such as Fit to Page, Poster, or wallet, by selecting your own
reduction/enlargement percentages. These settings are available
when Scanner and Copy buttons are lit.
If the margins of your full-size original are smaller than the minimum
margin settings supported by your unit, they will be cut off during the
copy process. To get a full copy, use the Fit to Page feature. For more
information on this feature, see fit a copy to the page on
page 31. For more information on your unit’s margins, see Margins
in the Support and Specifications booklet.
For more information, see load originals on the glass on
page 22.
1 Press Scanner, then press Copy, if not already lit.
2 Press Options until Which Size? appears.
To Next Page
