use the fax features
48
hp psc 900 series
3 Press Enter, then press to scroll through the following report types.
– Every Error, which prints whenever there is any kind of fax error
(default).
– Send Error, which prints whenever there is a transmission error.
– Receive Error, which prints whenever there is a receiving error.
– Every Fax, which confirms every time a fax is sent or received.
– Send Only, which prints every time a fax is sent.
– Off, which does not print fax reports.
4 After the option that you want appears, press Enter.
generate
manual
reports
1 Press Setup.
2 Press 1, then press Enter.
3 Press to scroll through the following report types.
– 1:Last Transaction, which indicates the status of the last fax
sent.
– 2:Fax Log, which lists approximately the last 40 faxes sent and
received.
– 3:Speed Dial List, which lists your individual and group
numbers.
– 4:Menu Settings, which lists in outline form the entire menu
system and indicates the current and default settings.
– 5:Self-Test Report, which prints a self-test report. For more
information, see print a self-test report in the onscreen User’s
Guide.
– 6:Automatic Reports Setup, which is the automatic reports
setting described in generate automated reports on
page 47.
4 Select the report you want, then press Enter.
control resolution and contrast
You can change the resolution and contrast of documents that you are
sending. Your changes remain in effect until you change them again.
change
resolution
Resolution affects the transmission speed and quality of faxed documents.
1 Press Scanner and then press Fax, if not already lit.
2 Press Options until Resolution appears.
3 Press to scroll through the available options until the one you want
appears.
The copy settings do not affect faxing, and the fax
resolution settings do not affect copying.
To Next Page
