set the fax header
55
hp psc 900 series
set the fax header
Follow these steps to enter your name and fax number.
1 Press Setup.
2 Press 3, then press 2.
This selects the Basic Fax Setup menu, then selects the Fax
Header option.
3 After Your Name appears, enter your name using the numeric
keypad as described in the next section, enter text on page 55.
4 Using the keypad, enter your fax number.
5 After you finish entering your fax number, press Enter.
enter text
The following list provides tips for entering text using the front-panel
keypad.
• Press the keypad numbers that correspond to the letters of a name.
• Press a button multiple times to see a letter first in lowercase and then
in uppercase. The first letter of a word is upper-cased automatically
.
• After the correct letter appears, press , then press the number that
corresponds to the next letter in the name. Again, press multiple times
until the correct letter appears.
• The cursor automatically advances to the right 1.5 seconds after the
last button is pressed.
• To insert a space, press Space (#).
• To enter a symbol, such as @, press Symbols (*) repeatedly to scroll
through the list of available symbols, which are: *, -, &, ., / (), ‘, =, #,
@, _, and !.
• If you make a mistake, press to clear it, then make the correct entry.
• After you are done entering text, press Enter to store your entries.
In Hungary, the subscriber identification code (fax
header) can be set or changed only by authorized
personnel. For more information, contact your
authorized HP dealer.
These letters correspond
to this number, and so on.
AB
2
To get this character:
Press 5 this many times:
JKL
5
j
1
k
2
l
3
J
4
K
5
L
6
5
7
To Next Page
