HP rp5800 - Installing or Upgrading Device Drivers (Windows systems)

EL-MF877-00 Page 12
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Figure 37 Remove M/B from chassis
Figure 38 Remove the screws on the PSU chassis
Figure 39 Lift the cover off the power supply
Figure 40 Remove the four screws on the board
Figure 41 Using Soldering Iron, heat the solder of the
cables which connect
to the PCA, then remove them
Figure 42 Remove the power supply cable from the power
supply