EasyManuals Logo

HP RP7 Model 7800 Illustrated Parts And Service Map

HP RP7 Model 7800
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HP RP7 Retail System Model 7800 703845-001 page 1
Illustrated Parts & Service Map
HP RP7 Retail System Model 7800
© 2012 Hewlett-Packard Development Company, L.P. The information con-
tained herein is subject to change without notice. HP shall not be liable for tech-
nical or editorial errors or omissions contained herein. Intel, Pentium, Intel
Inside, and the Intel logo are trademarks or registered trademarks of the Intel
Corporation and its subsidiaries in the U. S. and other countries.
Document Number 703845-001. 1st Edition August 2012.
Key Specifications
Spare Parts
Processor Type Intel® Core i5, i3, Pentium, Celeron
RAM Type
Non-ECC DDR3 PC3-12800 (1666 MHz) & PC3-10600 (1333 MHz)
Maximum RAM 16 GB
Display Options HP RP7 15 inch Resistive AFD Display
HP RP7 15 inch Capacitive AFD Display
HP RP7 17 inch Capacitive AFD Display
Chipset Intel Q67 Express
Graphics Adapter Integrated Intel HD graphics
Options •HP Retail Integrated Fingerprint Reader
HP Retail Integrated Dual-Head MSR
HP Retail Integrated Webcam
HP RP7 10.4-inch CFD Display
HP RP7 VFD Customer Display
HP RP7 Adjustable Stand
I/O Interfaces
•6 USB 2.0
2 USB+PWR 12V (1 available if VFD Customer Display installed)
1 USB+PWR 24V (Printer)
1 USB in lockable compartment
1 RJ-12 Cash Drawer (dual drawers via optional Y cable)
2 RS-232 Powered (+5V/+12V, F-10 Setup Configurable)
1 Parallel port
1 PS/2 (supports keyboard or mouse, both through a splitter)
1 DVI-I for Secondary Display (not available if 10.4-inch CFD installed)
1 RJ-45 10/100/1000 LAN
1 Audio line-in
1 Audio line-out (not available if 10.4-inch CFD installed and audio connected
1 DC-in (for power supply)
1 DC-out (for HP RP7 10.4-inch CFD only)
4 connectors for select HP integrated peripherals
Preinstalled
Operating Systems
Windows 7 Professional (32-bit or 64-bit)
Windows Embedded POSReady 2009
Genuine Windows® Embedded POSReady 7 (32-bit or 64-bit)
Plastics
1 Display head back panel and rear I/O cover 702769-001
2 Power supply cover 702787-001
3 USB cover plate (for integrated USB module slots on sides of display) xxxxxx-001
* Power adapter, 180W (does not include power cord) 702778-001
In Mold Decoration (IMD; customizable) covers:
4 Panel with hole (for bottom rear on models with VFD) 702781-001
5 Panel without hole (for bottom rear on models without VFD) 702786-001
6 Top panel, small (for top rear of display) 702770-001
* Not shown
Cables
1 Hard drive LED cable assembly 702777-001
2 Hard drive harness cable assembly 702776-001
3 Hood sensor 702772-001
4 Antenna kit 702771-001
*Not shown
Mass Storage Devices (not illustrated)
320 GB, 7200 rpm SATA hard drive 639135-001
256 GB Solid State Drive (SSD) 661842-001
128 GB Solid State Drive (SSD) 665961-001
32 GB MLC Flash, 2.5-in (mSATA SSD) 686616-001
System Boards, Memory, Processors (not illustrated)
* System board (includes replacement thermal material) 674783-001
Memory modules (PC3-12800, CL11, SODIMM)
*8 GB
689374-001
*4 GB
689373-001
*2 GB
689372-001
Processors (include thermal replacement material)
* Intel Core i5 2400S processor, 2.5 GHz, 65W 640953-001
* Intel Core i3 2120 processor, 3.3 GHz, 65W 638629-001
* Intel Pentium Dual-Core G850 processor, 2.9 GHz, 65W 655973-001
* Intel Celeron G540 processor, 2.5 GHz 665119-001

Other manuals for HP RP7 Model 7800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP RP7 Model 7800 and is the answer not in the manual?

HP RP7 Model 7800 Specifications

General IconGeneral
BrandHP
ModelRP7 Model 7800
CategoryTouch terminals
LanguageEnglish

Related product manuals