HP s300 User Manual

63
DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your
memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the
camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the
embedded information on the memory card and print the specified images.
To set DPOF:
Press the 1. Menu button
to launch the Playback
menu.
Select 2. DPOF. The submenu appears. Available settings are as
follows:
• Single. Select a single image to mark.
• All. Mark all images in the memory card.
• Reset. Reset all DPOF settings to initial default settings.
To set DPOF on a single image/all images:
Select 1. Single or All on the DPOF submenu.
For single image, use the 2.
or keys to scroll and select an
image to mark for printing.
Specify the number of copies. Use the 3.
or to increase/
decrease number.
Press the 4.
button to toggle between turning on/off the
date stamp.
Press the 5. OK button
to save DPOF settings.
To reset DPOF:
Select 1. Reset on the DPOF submenu. A confirmation message
appears.
Select 2. Yes.
Press the 3. OK button
to reset DPOF settings.
For more information on printing, see page 72.

HP s300 Specifications

Camera Sensor

sensor type	1/2.3” CCD
total pixels	14.5 MP (4440 x 3274)
effective pixels	14.2 MP (4368 x 3256)

Display

screen size	2.7 inches

Zoom

optical zoom	4X
digital zoom	5X

Power

battery type	Li-ion battery

Weight and Dimensions

dimensions	98 x 53 x 19 mm (3.9 x 2.0 x 0.7 in)
weight without battery	100 g (0.22 lb)