HP Scanjet 7000 User Manual

Scanner initialization or hardware problems
• Check the USB connection
•
Check that the scanner has power
•
Reset the scanner
•
Scanner has stopped working correctly
Check the USB connection
Check the physical connection to the scanner.
• Use the cable that was included with the scanner. Another USB cable might not be
compatible with the scanner.
• Ensure that the USB cable is securely connected between the scanner and the
computer. The trident icon on the USB cable faces up when the cable is properly
connected to the scanner.
If the problem persists after verifying the above items, try the following:
1. Do one of the following tasks depending on how the scanner is connected to the
computer:
• If the USB cable is connected to a USB hub or a docking station for a laptop,
disconnect the USB cable from the USB hub or the docking station, and then
connect the USB cable to a USB port on the back of the computer.
• If the USB cable is directly connected to the computer, plug it into a different USB
port on the back of the computer.
• Remove all other USB devices from the computer except for the keyboard and
the mouse.
2. Press the Power switch to the off position, wait 30 seconds, and then press the
Power switch to the on position.
3. Restart the computer.
4. After the computer has restarted, try using the scanner.
• If the scanner works, reconnect any additional USB devices one at a time; try the
scanner after connecting each additional device. Disconnect any USB devices
that prevent the scanner from working.
• If the scanner does not work, uninstall and then reinstall the HP Scanjet drivers
and utilities.
See also
Uninstall and then reinstall the HP Scanjet utilities
Check that the scanner has power
The power cable is connected between the scanner and a power outlet.
• Ensure that the power cable is securely connected between the scanner and a live
electrical outlet.
• If the power cable is connected to a surge protector, ensure that the surge protector
is plugged into an outlet and turned on.
Scanner initialization or hardware problems 29

HP Scanjet 7000 Specifications

General

Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	0 - 90 %
Operating relative humidity (H-H)	15 - 80 %
Package weight	10200 g
Sustainability certificates	ENERGY STAR
Input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	40 W
Display	LCD
Scanner type	Sheet-fed scanner
Product color	Black, Silver
Film scanning	-
Color scanning	Yes
Grayscale levels	256
Input color depth	48 bit
Maximum scan size	216 x 864 mm
Output color depth	24 bit
ADF scan speed (b/w, A4)	40 ppm
ADF scan speed (color, A4)	35 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (b/w, A4)	80 ipm
Duplex ADF scan speed (color, A4)	70 ipm
Safety	IEC 60950-1, CCC, GOST, BSMI, NOM
Minimum scan size	50.8 x 73.6mm
Image formats supported	BMP, JPG, PNG, TIF
ISO A-series sizes (A0...A9)	A4, A5, A6, A8
Scanning media types supported	Card stock, Envelopes, Plain paper
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	49 - 120 g/m²
Scan to	E-mail
Sensor type	CCD
Scan drivers	ISIS, TWAIN, WIA
Scan file formats	BMP, DOC, HTM, JPG, OPF, PDF, PNG, RTF, TIFF, TXT, UNICODE, WPD, XLS, XPS
Daily duty cycle (max)	2000 pages
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	512 MB
Mac compatibility	No
Minimum processor	1.3 GHz
Minimum storage drive space	300 MB
Minimum system requirements	USB 1.1 CD-ROM 1024x768 SVGA
Compatible operating systems	Windows 7 Windows Vista Windows XP Professional (32/64-Bit) Windows XP Media Center Windows XP Home Windows 2000
Windows operating systems supported	Windows 2000, Windows XP Home, Windows XP Professional, Windows XP Professional x64
Electromagnetic compatibility	FCC, CISPR, ANSI, CAN/CSA–CISPR, EN, AS/NZS CISPR, CNS

Weight and Dimensions

Depth	280 mm
Width	320 mm
Height	246 mm
Weight	7280 g