HP Scanjet 7400c Series - Completing your first scan

Back to TOC Getting started 9
Completing your first scan
Doing your first scan is easy. This section shows you how to take the
same item and scan to print using the two primary scanning methods:
● the scanner buttons
● HP PrecisionScan Pro software
Before scanning, you will load the item in the scanner.
To load the item in the scanner
1 Choose an item to scan, such as a page from a magazine.
2 Place the item face down on the scanner glass and close the lid.
3 See "To complete your first scan using the scanner buttons" on
page 10.