Create scan profiles that use third-party scanning software
If you have scanning software that you want to use with your scanner, you can create profiles that
use your software.
To create a third-party scan profile, follow these steps:
1. Turn on the scanner and start the HP Scanner Tools Utility.
2. Click the Profiles tab.
3. In the Other application profiles area, click Create.
4. Complete the fields in the Create/Edit Other Application dialog box.
●
Application: Enter the complete path and filename of the scanning software you want to
use, or click Browse to locate and select it.
●
Name: Enter a name for this profile as you want it to display in the scanner LCD list. You
can enter up to 32 characters (16 for double-byte languages such as Chinese and Korean).
●
Details: Enter a description of up to 24 characters (12 for double-byte languages).
5. Command Line for Simplex Button and Command Line for Duplex Button: If your scanning
application supports specific command line parameters for scanning, enter them here.
6. When you are done, click OK.
TIP: If you later want to edit or delete the third-party profile you created, click either Edit or Delete
in the Other application profiles area on the Profiles tab.
Import and export HP Smart Document Scan Profiles
Profiles can be exported into and imported from an XML file so that administrators can set up profiles
for a workgroup, users can transfer their profiles from one machine to another, and users can share
custom profiles with each other.
Work with scan profiles 15
To Next Page
Loading...