Scan extra long documents
By default, the HP Smart Document Scan Software accepts a stack of originals up to 216 mm x 356
mm (8.5 in x 14 in). You can choose to scan single pages up to 216 mm x 864 mm (8.5 in x 34 in).
NOTE: If the scanner is set to scan long pages and a page jams, up to 864 mm (34 in) of document
pages can be wrinkled as a result of the jam. Therefore, select scan profiles that specify long pages
only when you are scanning pages longer than 356 mm (14 in).
To enable long-page scans in an HP Smart Document Scan Software profile, follow these steps:
1. Open the HP Smart Document Scan Software.
2. Select a scan profile, and then click Edit profile.
3. On the Scan tab of the Profile Settings dialog box, click Page Size.
4. Select Custom in the Page size drop-down list, and then type the actual page dimensions, up to
216 mm x 864 mm (8.5 in x 34 in), in the Width and Height boxes.
NOTE: Use the ISIS or TWAIN user interface to set the page size when scanning from third-
party applications.
NOTE: Some scanning and destination software might not support all of the page sizes that
the scanner accepts.
NOTE: HP recommends scanning long pages individually at a resolution of 300 dpi or lower.
16 Chapter 3 Useful scanner features
To Next Page
Loading...