8 Replace and install components
This section presents information about how to replace and install product components.
●
Replace the rollers
●
Replace the separation pad
●
Replace the front panel
●
Replace the keyboard
●
Replace the hard drive
●
Install a Jetdirect card
●
Install an accessory into the hardware integration pocket
Animations which guide you through several maintenance tasks are available on the web. For the latest
parts information and animations, see
www.hp.com/support, and search on your product.
Replace the rollers
Replace the rollers under the following conditions:
●
When the Maintenance Recommended dialog box indicates they are due for maintenance.
●
If you experience repeated document jams and cleaning the rollers did not help.
TIP: An animation which guides you through removing and replacing the rollers is available on the
web (see
www.hp.com/support, and search on your product).
The roller replacement kit includes a replacement separation pad. To order the replacement kit, see
www.hp.com/buy/parts.
NOTE: The roller replacement kit is a consumable and is not covered under warranty or standard
service agreements.
To replace the rollers, follow these steps:
1. Press the Power button to turn off the product, and then disconnect the power cable.
Replace the rollers
57
To Next Page
Loading...
