HP ScanJet Scanners - Page 22

3-5 Replacing the ADF Window
....................................................................................................................................................................................................................................
To install the ADF window:
1
Position the four Z-shaped hooks of the ADF window
into the four holes on the bottom of the ADF.
2
Rotate the ADF window back until it contacts the
bottom of the ADF.
3
Check that the long, pointed tab is on the inside of the
ADF.
4
Beginning the with Z-shaped hook closest to the long,
pointed tab, push each of the Z-shaped hooks toward
the back of the ADF.
5
Verify that the long, pointed tab is on the inside of
the ADF.
Adf.bk : MAINTN.FM5 Page 5 Sunday, December 21, 1997 4:50 PM