HP ScanJet Scanners - Replacing the ADF Window

Replacing the ADF Window 3-4
....................................................................................................................................................................................................................................
Replacing the
ADF Window
If the ADF window becomes scratched or uncleanable,
you may need to replace it. Order the ADF window from
Hewlett-Packard (see “Ordering Parts and Supplies” on
page 3-7).
To remove the ADF window:
1
Remove the ADF from the scanner (see “Removing
the ADF” on page 3-6).
2
Lift the input tray of the ADF to expose the
ADF window.
3
Using a small
coin, push
each of the
four Z-shaped
hooks until
the tab snaps
out of
position. Push
the long,
pointed tab on
the end of the
window.
The ADF window is
free to pull out:
Removing the ADF window
Pushing the Z-shaped hooks
Z-shaped
hook
Adf.bk : MAINTN.FM5 Page 4 Sunday, December 21, 1997 4:50 PM