Fabric OS 6.1.2bFabric OS features (supported in interopmode 0)
NoNoAlias Server
NoNoPlatform Service
YesYesFCIP (VE_Ports)
Yes
8
Yes
9
IPFC (IP over FC)
YesYesM-EOS ALPA 0x13 configuration
YesYesVE_Port to VEX_Port
YesYesIntegrated Routing
NoNoDomain Offset Support
NoN/A239 Domain Support
YesYesMasterless F_Port Trunking (AG connect to Fabric OS switched only)
YesYesFC10–6 to FC10–6 ISL
YesYesRASLog Events on duplicate WWNs
1
Feature requires M-EOS 9.7 or later.
2
The feature is available, but not officially tested or supported.
3
SCC policies are supported only in conjunction with L2 Fabric Binding support.
4
Allowed only between Fabric OS-based switches.
5
DPS is supported outbound from Fabric OS-based switches. M-EOS can provide reciprocal load balancing using OpenTrunking.
6
Not supported in Fabric OS 6.0 and later.
7
Mode 3 qualified only with M-EOS switches.
8
Not on FCR.
9
Supported locally only within the Fabric OS switch.
NOTE:
FICON Cascaded CUP is qualified only on select platforms.
Prerequisites
Table 2 lists the supported Fabric OS firmware versions. HP recommends using the latest supported
firmware release versions to get the greatest benefit from the SAN.
For a list of retired products, see the HP website:
http://www.hp.com
HP StorageWorks Fabric OS 6.1.2b release notes 11
To Next Page
Loading...
Need help?
General