• HP StorageWorks 16 Port 4–Gb SAN Director Blade (FC4–16)
• HP StorageWorks 32 Port 4–Gb SAN Director Blade (FC4–32)
• HP StorageWorks 48 Port 4–Gb SAN Director Blade (FC4–48)
• HP StorageWorks Multi-protocol Router Blade (FR4–18i)
• HP StorageWorks B-series iSCSI Director Blade (FC4–16IP) compatible with the 4/256 Director
model only, not supported in the DC SAN Director
• HP StorageWorks 8/8 and 8/24 SAN Switches (Brocade 300)
• HP StorageWorks 8/40 SAN Switch (Brocade 5100)
• HP StorageWorks 8/80 SAN Switch (Brocade 5300)
• HP StorageWorks 400 Multi-protocol Router (Brocade 7500)
• HP StorageWorks DC SAN Director (Brocade DC Director Data Center Backbone)
• HP StorageWorks SAN Director 16 Port 8–Gb FC blade (Brocade FC8–16)
• HP StorageWorks SAN Director 32 Port 8-Gb FC blade (Brocade FC8-32)
• HP StorageWorks SAN Director 48 Port 8–Gb FC blade (Brocade FC8–48)
• HP StorageWorks SAN Director 6 Port 10–Gb FC ISL blade (Brocade FC10–6)
• Brocade 4–Gb SAN Switch for HP p-Class BladeSystem (Brocade 4012)
• Brocade 4–Gb SAN Switch for HP c-Class BladeSystem (Brocade 4024)
Unsupported product models
The following product models cannot be upgraded to Fabric OS 6.1.2b or later:
• HP StorageWorks MSA SAN Switch 2/8 (Brocade 3000)
• HP StorageWorks SAN Switch 2/8V (Brocade 3250)
• HP StorageWorks SAN Switch 2/16 (Brocade 3800)
• HP StorageWorks SAN Switch 2/16V (Brocade 3850)
• HP StorageWorks SAN Switch 2/32 (Brocade 3900)
• HP StorageWorks Core Switch 2/64 (Brocade 12000)
• HP StorageWorks SAN Director 2/128 (Brocade 24000)
• HP StorageWorks Multi-protocol (MP) Router (Brocade AP7420)
IMPORTANT:
Any enhancements for the models listed above will be delivered in Fabric OS 3.2.x, Fabric OS 5.0.5x,
and XPath OS 7.4.x sustaining releases.
Devices supported
For a list of supported devices, see the HP website:
http://www.hp.com/go/san
Operating systems
For a list of operating systems, see the HP website:
http://www.hp.com/go/san
HP StorageWorks Fabric OS 6.1.2b release notes 7
To Next Page
Loading...
Need help?
General