5 Understanding LEDs
There are two sets of LEDs; one for the Tape Blade chassis and one for the Ultrium tape drive.
In this chapter:
• “Tape Blade Chassis LEDs” on page 37
• “Tape Drive LEDs” on page 38
Tape Blade Chassis LEDs
Figure 17 Tape Blade chassis LEDs
.
Blue = Identified
Off = Not identified
UID LED1
Green = Normal operation
Flashing amber = Degraded condition
Flashing red = Critical condition
System health LED2
Not usedReserved3
Tape Blade 37
To Next Page
Loading...
