EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
37. Dis-connect LCD cable connector from LCM
38. Remove screw M2L2.5 x 2 & M2.5L4 x 2 &M2.5L2.5 x 4 on hinge L / R bracket
39. Remove hinge L / R from LCD sub-Assy.
40. Dis-connect LCD cable connector from Cam. module
41. Remove LCD cable from LCD sub-Assy.
42. Remove Cam. module from LCD sub-Assy.
43. Remove antenna cable from LCD sub-Assy.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
3.21 Total
3.22 Remove base rubber foot and screw
To Next Page
Loading...
