HP Switch - Page 39

Ports 1 switch fabric slot
2 I/O module slots
Supports a maximum of 16 10GbE ports or 120 autosensing 10/100/1000 ports or 120 SFP ports or 8 40-
GbE ports, or a combination
Power supplies 2 power-supply slots
1 minimum power-supply required (ordered separately)
Fan tray includes: 1 x JC672A
1 fan tray slot
Physical characteristics Dimensions 17.17(w) x 16.54(d) x 6.89(h) in (43.6 x 42.0 x 17.5 cm) (4U height)
Weight 59 lb (26.76 kg), Fully loaded chassis, one fabric, two power supplies, and a
full complement of typical I/O modules
Memory and processor Fabric MIPS64 @ 400 MHz, 64 MB flash, 512 MB RAM
I/O Module MIPS64 @ 400 MHz, 512 MB RAM
Mounting Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); horizontal surface
mounting only
Performance Throughput 107 million pps
Routing/Switching
capacity
144 Gbps
Routing table size 256000 entries (IPv4), 8000 entries (IPv6)
MAC address table size 512000 entries
Reliability Availability 99.999%
Environment Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 95%, non-condensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, non-condensing
Acoustic High-speed fan: 56.7 dB
Electrical characteristics Description The H3C S7506E (HP 7506) is Certified Green in the 2009 Miercom Green
Switches Industry Assessment.
Voltage 100-120 / 200-240 VAC
DC Voltage -48 V / -60 V
Current 5 / 10 A
Power output 300 W
Frequency 50 / 60 Hz
Notes Based on a common power supply of 300 W (AC/DC)
Safety UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
Emissions VCCI Class A
EN 55022 Class A
ICES-003 Class A
ANSI C63.4 2003
QuickSpecs
HP 7500 Switch Series
Technical Specifications
DA - 13805 Worldwide — Version 29 — December 9, 2013 Page 39