Ports
2 switch fabric slots
10 I/O module slots
Supports a maximum of 84 10GbE ports or 480 autosensing 10/100/1000 ports or 480 SFP ports, or a
combination
Power supplies
2 power-supply slots
1 minimum power-supply required (ordered separately)
Fan tray
includes: 1 x JD216A
1 fan tray slot
Physical characteristics
Dimensions
17.17(w) x 16.54(d) x 27.87(h) in (43.6 x 42.0 x 70.8 cm) (16U height)
Weight
211 lb (95.71 kg), Fully loaded chassis, two fabrics, two power supplies, and a
full complement of typical I/O modules
Memory and processor
Fabric
MIPS64 @ 600 MHz, 64 MB flash, 512 MB RAM
I/O Module
MIPS64 @ 400 MHz, 512 MB RAM
Mounting
Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); horizontal surface
mounting only
Performance
Throughput
714 million pps
Routing/Switching
capacity
1152 Gbps
Routing table size
256000 entries (IPv4), 8000 entries (IPv6)
MAC address table size
512000 entries
Reliability
Availability
99.999%
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 95%, non-condensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, non-condensing
Acoustic
Low-speed fan: 53.5 dB, High-speed fan: 56.7 d
Electrical characteristics
Frequency
50/60 Hz
Description
Voltage
100-120/200-240 VAC
DC Voltage
-48 to -60 VDC
Current
16/50 A
Power output
1400 W
Notes
Based on a common power supply of 1400 W (AC/DC)
Safety
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
Emissions
VCCI Class A
EN 55022 Class A
ICES-003 Class A
ANSI C63.4 2003
AS/NZS CISPR 22 Class A
QuickSpecs
HP 7500 Switch Series
Technical Specifications
DA - 13805 Worldwide — Version 29 — December 9, 2013
Page 47
To Next Page
Loading...
