1
HP Designjet external hard disk
The external hard disk replaces the printer's internal hard disk as a repository of personal
data (the job queue, including temporary files, accounting, and so on). The external hard
disk can be removed and stored in a secure place when the printer has been turned off.
You cannot use the hard disk to share files between printers or to download files from any
computer to the printer.
The external hard disk has been designed to be used with HP Designjet T1200 printers only.
It may be damaged if you attempt to connect it to other devices.
For more information about the use of this accessory, see the Troubleshooting section in this
document.
How to install
1. Attach the hard disk holder to the left leg of the stand using the adhesive patch
on the holder (press firmly).
2. Place the external hard disk into the holder.
3. Connect the USB cable to the external hard disk.
4. Ensure that the printer is turned on.
5. The front panel displays the following messages:
Main Menu
Go to Setup
Choose External hard disk
The front panel displays:
Install External Hard Disk
Uninstall External Hard Disk
6. Choose Install External Hard Disk
7. The front panel displays, “Connect external hard disk or press x to
abort”.
To Next Page
Loading...
Need help?
General
