HP t5400 - Thin Client User Manual

To share USB devices, complete the following steps:
1. On the thin client, open the Control Panel and select HP RDP USB Redirector Client.
NOTE: If Use Taskbar Icon is checked, you can right-click the icon in the task bar to open the
HP RDP USB Redirector status. This lists the devices that are currently available or plugged in.
Click Advanced to open the HP RDP USB Redirector Client dialog box.
2. Select the USB devices you want to redirect.
●
To automatically redirect all USB devices, check Auto-share devices (Auto-share is off by
default).
NOTE: Auto-share automatically shares devices when they are plugged in. Most USB
keyboards and mice are automatically excluded from Auto-share, because when a device is
shared, it is disconnected from the local system. However, some multi-interface (composite
USB) keyboards might not be automatically excluded from Auto-share. These types of
devices should be manually excluded before enabling Auto-share.
●
To selectively redirect USB devices, select each device individually from the list displayed,
then click Share, Unshare, or Exclude.
●
To prevent a device from being automatically redirected for use with the remote desktop,
select the device and click Exclude. This disables both Share and Unshare. In order to
share the device manually or automatically, you must click Unexclude.
ENWW
HP Remote Desktop Protocol (RDP) Multimedia and USB Enhancements
21

HP t5400 - Thin Client Specifications

General

Brand	HP
Model	t5400 - Thin Client
Category	Server
Language	English