3 Thin Client Operation
Routine Thin Client Care
Use the following information to properly care for your thin client:
●
Never operate the thin client with the outside panel removed.
●
Keep the thin client away from excessive moisture, direct sunlight, and extreme heat and cold.
For information about the recommended temperature and humidity ranges for the thin client, see
Specifications on page 31.
●
Keep liquids away from the thin client and keyboard.
●
Turn off the thin client and wipe the exterior with a soft, damp cloth as needed. Using cleaning
products may discolor or damage the finish.
Supported Orientations
HP supports the following orientations for the thin client.
CAUTION: You must adhere to HP-supported orientations to ensure your thin clients function
properly.
●
You can lay the thin client horizontally.
CAUTION: If your thin client is not mounted, this is the only supported orientation.
Figure 3-1 Horizontal orientation
●
You can lay the thin client under a monitor stand with at least one inch of clearance.
10 Chapter 3 Thin Client Operation
To Next Page
Loading...
Need help?
General