10. To insert the new battery, slide one edge of the replacement battery under the holder’s lip with the positive
side up. Push the other edge down until the clamp snaps over the other edge of the battery (2).
11. Replace and latch the access panel, and then reinstall the rear I/O panel. See Removing and replacing the
access panel on page 10.
12. Replace the thin client stand.
13. Reconnect the AC power cord and turn on the thin client.
14. Lock any security devices that were disengaged when the thin client access panel was removed.
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable
batteries. For more information about recycling programs, go to http://www.hp.com and search for “recycle”.
Icon Denition
Batteries, battery packs, and accumulators should not be disposed of together with the general household waste.
In order to forward them to recycling or proper disposal, please use the public collection system or return them to
HP, an authorized HP partner, or their agents.
The Taiwan EPA requires dry battery manufacturing or importing rms, in accordance with Article 15 or the Waste
Disposal Act, to indicate the recovery marks on the batteries used in sales, giveaways, or promotions. Contact a
qualied Taiwanese recycler for proper battery disposal.
Removing and replacing the battery 17
To Next Page
Loading...
