5. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys to
select the option you want, then press enter. To return to the Computer Setup Utilities menu, press esc.
6. To apply and save changes, select File > Save Changes and Exit.
●
If you have made changes that you do not want applied, select Ignore Changes and Exit.
●
To reset to factory settings, select Apply Defaults and Exit. This option will restore the original factory
system defaults.
CAUTION: Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes
because the CMOS could become corrupted. It is safe to turn o the computer only after exiting the F10 Setup
screen.
Heading Table
File Computer Setup—File on page 23
Storage Computer Setup—Storage on page 24
Security Computer Setup—Security on page 25
Power Computer Setup—Power on page 26
Advanced Computer Setup—Advanced on page 27
22 Appendix A Computer Setup (F10) Utility, BIOS Settings
To Next Page
Loading...
Need help?
General
