12. Select File > Apply Defaults and Exit.
13. Shut down the computer, remove AC power cord, and then place the (blue/green) jumper back on header
E49. Replace the computer hood and power cord.
Model Description Location/Size Power Loss of data Comments
t630
System Boot ROM
(BIOS)
SPI ROM (64 Mbit)
socketed,
removable.
System memory
(RAM)
SODIMM socket.
Removable
(4GB/8GB/16GB)
Main power If main power is
removed
Only S0/S3/S5/G3
ACPI states are
supported
RTC (CMOS) RAM RTC RAM is 272-
byte RAM Memory in
AMD embedded
System on Chip
(SoC)).
Main/battery If battery power is
removed
Keyboard/mouse
(ROM)
2k bytes embedded
in the super I/O
controller (SIO12)
Main
Keyboard/mouse
(RAM)
256 bytes
embedded in the
super I/O controller
(SIO12)
Main If main power is
removed
LOM EEPROM 256 bytes
embedded in LAN
Chip
Aux One Time
programmable
memory (OTP)
TPM 6 kBytes embedded
in TPM Chip. It’s ROM
for TCG Firmware
Main
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
If you require additional information or need assistance please contact James Smalls at 281-927-7489.
49
To Next Page
Loading...
Need help?
General
