Need help?Do you have a question about the HP U818 Series and is the answer not in the manual?
Provides general information about the guide, regulatory notices, and co-location prohibition.
Details WEEE disposal and CE regulatory compliance for the product.
Covers FCC compliance, radio frequency, and important installation guidelines.
Lists important cautions for product use and installation.
Highlights key features of the car camcorder, including resolution and lens.
Lists all items included in the camcorder package.
Identifies and describes the physical components and buttons of the camcorder.
Instructions for inserting and removing memory cards, including supported types and formatting.
Steps for mounting the camcorder to the windshield and adjusting its position.
Guides on connecting the camcorder to power and understanding the LED status lights.
Procedures for manually and automatically powering the camcorder on/off and performing a device reset.
Steps to set the time zone and adjust the date and time for accurate recording.
How the camcorder automatically starts and stops recording based on the vehicle's engine status.
Explains the various icons and information displayed on the camcorder's recording screen.
Details how to initiate emergency recording and how it's triggered by events.
Instructions on adding custom speed camera positions to the device.
How to take still snapshots of the current scene while recording video.
Overview of safety functions like Speed Cam Alert, Speed Limit Alert, LDWS, FCWS, and FCMD.
Notifies the driver about approaching speed cameras based on GPS data.
Warns the driver if their speed exceeds the set limit.
Alerts the driver to take a break if fatigue is detected.
Warns if the vehicle drifts out of its lane.
Alerts the driver about potential forward collisions.
Alerts the driver about poor lighting conditions.
How to playback recorded videos/photos and delete files.
Details the controls and information shown on the playback screen.
Steps for securely deleting video and photo files from the camcorder.
Guide on downloading and installing the Go Dashcam mobile application.
Steps to connect the camcorder to a mobile device via Wi-Fi.
Using the app for live preview, recording, and taking photos.
Managing recorded files via the mobile application, including playback and download.
Accessing and managing downloaded videos and photos on the mobile device.
Adjusting camcorder settings directly through the Go Dashcam application.
How to navigate and select options within the on-screen display (OSD) menus.
Configure Wi-Fi, Satellite, Speed, Time Zone, Date/Time, Language, Resolution, and Playback settings.
Adjust EV, LCD, Voice Record, Key Tone, Volume, and Record Interval settings.
Configure Parking Mode, Collision Detection, Driver Fatigue, Headlight Warning, LDWS, FCWS, and FCMD.
Manage files, format card, reset defaults, and check firmware version.
Steps to install software from the provided CD ROM.
Overview of the SuperCar software for video playback, route display, and sensor data viewing.
Technical details of the camcorder's image sensor, resolution, lens, and storage.
Details on power, operating conditions, dimensions, weight, and Wi-Fi specifications.
General| Loop Recording | Yes |
|---|---|
| G-Sensor | Yes |
| Parking Monitoring | Yes |
| Motion Detection | Yes |
| Parking Mode | Yes |
| Memory Card Support | Up to 32GB Micro SD card |
| Night Vision | Yes (6 IR LEDs) |
| Power Source | Car charger |
To Next Page
