HP V14

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP V14 Portable Monitor
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
1
Batteries
All types including standard alkaline and lithium coin
or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
USB type-b 3.0 cable
1
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations. 2
0
Components and waste containing asbestos
0

HP V14 Specifications

General

Brand	HP
Model	V14
Category	Monitor
Language	English

Summary

Items Requiring Selective Treatment

Printed Circuit Boards and Assemblies

Components classified as requiring selective treatment, with a surface greater than 10 sq cm.

Batteries

All types including standard alkaline and lithium coin or button style batteries requiring selective treatment.

Mercury-containing Components

Components containing mercury, such as lamps and display backlights, requiring selective treatment.

Liquid Crystal Displays

LCDs with a surface greater than 100 sq cm, including those with gas discharge lamps.

External Electrical Cables

Electrical cables and cords that require selective treatment.

Gas Discharge Lamps

Lamps that contain gas and require selective treatment.

Plastics with Brominated Flame Retardants

Plastics weighing over 25 grams containing brominated flame retardants.

Toner and Ink Components

Components containing toner and ink, including liquids, semi-liquids, and service stations.

Tools Required for Disassembly

Screw Driver Set

Tools typically used for disassembly, including Phillips head and hexagonal nut drivers.

Product Disassembly Process

Preparation and Bezel Removal

Initial steps involving laying the monitor flat and pulling up the bezel.

Rear Cover Removal

Procedure to unscrew and remove the rear cover of the monitor.

Cover, Key, and Magnet Removal

Steps to unscrew and remove the internal cover, key, and magnets.

Main Board and Cable Disconnection

Process to remove the main board by disconnecting cables and unscrewing.

Mylar Removal

Instructions for carefully removing the mylar component from the display assembly.

Panel Extraction

Final step to extract the display panel itself.