HP V1810-48G - Installing the Switch; Included Parts

2-1
2
Installing the Switch
The HP V1810-48G Switch is easy to install. It comes with an accessory kit that
includes the brackets for mounting the switch in a standard 19-inch telco rack,
in an equipment cabinet, and with rubber feet that can be attached so the
switch can be securely located on a horizontal surface. The brackets are
designed to allow mounting the switch in a variety of locations and orienta-
tions. This chapter shows how to install the switch.
Included Parts
The following components ship with a HP V1810-48G Switch:
■ Documentation kit
■ Accessory kit (5069-6535)
■ Power cord, one of the following:
• HP V1810-48G Switch Quick Setup Guide
• Safety and Regulatory information
• Software License, Warranty, and Support information
• two mounting brackets
• eight 8-mm M4 screws to attach the mounting brackets to the switch
• four 5/8-inch (15.875 mm) number 12-24 screws to attach the switch to a rack
• four rubber feet
Australia/New Zealand
China
Continental Europe
Denmark
Japan
Switzerland
United Kingdom/Hong Kong/Singapore
United States/Canada/Mexico
South Africa
India
Israel
Thailand
Taiwan
Argentina
Brazil
Chile
8121-0833
8120-8377
8120-6802
8120-6806
8120-6804
8120-6807
8120-8709
8120-6805
8120-6808
8121-0772
8120-6799
8121-0667
8121-0964
8120-6871
8121-1069
8120-6979