HP V1810-48G - Network Ports

1-2
Switch Overview
Switch Hardware Features
Network Ports
■ 48 auto-sensing 10/100/1000Base-T ports.
All these ports have the “Auto-MDIX” feature, which means that you can
use either straight-through or crossover twisted-pair cables to connect
any network devices to the switch.
■ Four mini-GBIC (SFP) slots for fiber or copper uplinks.
This product supports optional network connectivity as follows:
Optional Network Connectivity, Speeds and Technologies
Speed Technology
Cabling
SFP ("mini-GBIC")
Connector
1
100 Mbps 100-FX Fiber (multimode) LC
1 Gbps 1000-T Copper (twisted-pair) RJ-45
1000-SX Fiber (multimode) LC
1000-LX Fiber (multimode or single mode) LC
1
For supported transceivers, visit www.hp.com/networking/support.
– In the first textbox, type J4858 (for 100-Mb and Gigabit information).
– Select any of the products that display in the dropdown list.
– Select Product support information. Then click on Manuals and find the Transceiver
Support Matrix.
For technical details of cabling and technologies see "Cabling and Technology Information"
in the appendices.