sec to disable the OSD Lockout function.
“Power Button
Lockout” is
displayed.
The monitor's Power Button Lockout feature
is enabled.
Press and hold the Power button for 10
sec to unlock the power button function.
FreeSync is enabled
in monitor OSD, but
refresh rate does not
vary.
Variable refresh rate (VRR) m ght be
disabled in the graphics card software.
Enable VRR in your graphics card
software.
The monitor is off
but it did not seem
to enter into sleep
mode.
The refresh rate might be set too low.
In Windows, set the refresh rate to its
maximum setting.
The monitor is off
but it did not seem
to enter into sleep
mode.
Content and/or hardware might not
be VRR capable.
Verify the content being displayed is VRR
capable.
Be sure a computer with an AMD Radeon
graphics card or a AMD A-Series
processor is connected to the monitor
using a
DisplayPort or HDMI cable.
The monitor is
experiencing
screen tearing.
FreeSync might not be enabled.
Open the OSD and enable FreeSync.
To Next Page
Loading...
