9
H-SIZE
H-MOIRE REDUCE
H-CENTER
MOIRE DISABLE
V-SIZE
HE
NO USE
V-CENTER
VE
NO USE
PINCUSHION
NO USE
PARALLELOGRAM
V-LINEARITY
PIN-BALANCE
V-LINEARITY
TRAPEZOID
TOP CORNER
ROTATION
BOT CORNER
SH
NO USE
LH
NO USE
CONTRAST
HP
MAX-HSIZE MODIFY
BRIGHTNESS
VM
MAX-VSIZE MODIFY
R-BIAS
KM
MAX-TRAPEZOID MODIFY
G-BIAS
BI
BI SELECT FUNCTION
R-BIAS
DEGAUSS
R-GAIN
OSD EXIT
G-GAIN
RETURN
B-GAIN
Tm
BURN IN TIME
9300
COLOR TEMPERATURE
USER OSD HORIZONTAL
LOCATION ADJUST
6500
COLOR TEMPERATURE
USER OSD VERTICAL
LOCATION ADJUST
5500
COLOR TEMPERATURE
FV
FACTORY OSD VERTICAL
LOCATION ADJUST
V-MOIRE REDUCE
D. To switches the input signal to the other Timing Mode. Please follow step A ~ C to get the
optimum picture.(H/V-size:312*234mm)
E. Select the "
" RETURN function and press the MENU Key, then the Factor Preset
window will be returned to the original OSD window.(user's operating condition)
F. The setting data of the CONTRAST, BRIGHTNESS, ROTATION, COLOR TEMPERATURE are
common mode saved in the memory. Don't needed adjust it individual at every timing Mode and
save in the memory.
To Next Page
Loading...
