Do you have a question about the HP VALUE and is the answer not in the manual?
This guide provides information on setting up and using the HP Thermal Receipt Printer.
Details about the HP Value Thermal Printer and its key features.
Identifies and describes the user interface controls on the printer.
Illustrates and describes the connectors on the back of the printer.
Ensures all required items are present before installation.
Instructions for properly installing and replacing receipt paper rolls.
Detailed steps for connecting the printer to the POS computer and power.
Procedure for powering on the printer after setup.
Guide to installing necessary software drivers for printer operation.
Steps to perform a diagnostic test to verify printer functionality.
Information on available character sets and how to manage them.
Details on adjusting printer parameters via the configuration menu.
Step-by-step guide to access the printer's configuration settings.
Adjusting printhead energy level for darkness and paper variations.
Guidance on recognizing low paper status and replacing rolls.
Information on duty cycle restrictions and managing printhead heat.
Instructions for cleaning the exterior of the printer.
Procedure for cleaning the printer's thermal printhead.
Overview of the printer's diagnostic tests for status information.
Details on diagnostics performed during the printer's startup cycle.
Explanation of diagnostics that run during normal printer operation.
Information on remote diagnostics and printout tallies for printer health.
Troubleshooting guide for common issues, causes, and solutions.
Resources for obtaining technical support and assistance.
Information needed when contacting technical support for assistance.
Instructions and references for ordering replacement paper rolls.
Detailed specifications for the HP Value Thermal Printer.
Physical dimensions and weight of the printer.
Specifications related to the printer's power supply and consumption.
Details on printing speed, columns, paper size, and resolution.
Information on how to change text appearance using different print modes.
Details character sizes for standard and compressed print modes.
Specifications for qualified thermal paper rolls required by the printer.
List of qualified manufacturers and paper grades for monochrome printing.
Specifications for print zones and margins on 80 mm paper.
FCC compliance information for the device.
FCC requirements for device modifications and cable usage.
Declaration of conformity with FCC Part 15 rules.
Guidelines for proper disposal of the product as electronic waste.
Information on HP's program for recycling electronic hardware.
Information on chemical substances in the product per REACH requirements.
Details on Japanese regulatory requirements for hazardous substance declarations.
Compliance statement regarding Turkey's EEE Regulation.
Compliance statement regarding Ukraine's hazardous substances restrictions.