2 How to Install and Replace Components In Your Desktop PC
Upgrading and Installing Mass Storage Devices
60
5 Slide the drive bay back into the PC (ensuring the bottom catches
engage properly) and replace the sliding latch.
6 Attach all data and power connectors.
7 Replace the cover (described in this chapter).
8 Verify the new configuration by checking the HP Summary Screen.
To access the HP Summary Screen, press
Esc when the Vectra logo
appears during startup.
NOTE Ensure that you have installed all the required operating system and HP
drivers on the newly installed drive. To reinstall operating system and
HP drivers, use the Diagnostics & Recovery CD-ROM provided with
the PC. In addition, you can find the most up-to-date versions of HP
drivers on HP’s Web site at: www.hp.com/go/vectrasupport
.
➋
➊
To Next Page
Loading...
