2 How to Install and Replace Components In Your Desktop PC
Replacing the Floppy Drive
64
Replacing the Floppy Drive
1
Remove the computer’s cover (described in this chapter).
2
Remove the drive’s connectors.
3
Lift the latch
➊ and slide out the floppy drive tray ➋.
4
Remove the tray’s screws and remove the old floppy drive.
5
Align the new floppy drive in the tray (with the correct orientation)
and replace the screws.
6
Slide the floppy drive tray back into the PC.
7
Attach the data and power connectors.
8
Replace the cover (described in this chapter).
➊
➋
To Next Page
Loading...
