2 How to Install and Replace Components In Your Desktop PC
Upgrading and Installing Mass Storage Devices
62
5 Slide the drive bay back into the PC (ensuring the bottom catches
engage properly) and replace the sliding latch.
6 Attach all data and power connectors. If you are installing a CD-ROM
or DVD drive, connect the audio cable too.
7 Replace the cover (described in this chapter).
8 Verify the new configuration by checking the HP Summary Screen.
To access the HP Summary Screen, press
Esc when the Vectra logo
appears during startup.
➋
➊
Audio
Connector
(optional)
To Next Page
Loading...
