Setting Up and Using Your Linux Workstation
Setting Up Your Linux Workstation
Chapter 116
Connect the Power Cords
WARNING For your safety, always connect equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug,
such as the one provided with the equipment, or one in
compliance with your national safety standards. You disconnect
the Workstation from the power by removing the power cord
from the power outlet. This means the equipment must be
located close to an easily accessible power outlet.
1. Connect the power cords to the rear of the monitor and the
Workstation.
2. Connect the both power cords to a grounded outlet.
To Next Page
Loading...
