HP XP P9500

Table 61 Error codes (part code 6810) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The options "Block Option" and "Do not
Block (Volume Level)" cannot be
specified at the same time.
552126810
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Level 2 Threshold setting is incorrect.552146810
WCorrect the setting, then retry. If the same
problem persists despite retrying, please
contact HP Technical Support.
The Sleep Time setting is incorrect.552196810
WTo continue processing, click [OK]. To
stop processing, click [Cancel].
This function will apply the setting to all
the target CLPRs. This function will
590466810
overwrite the setting on a CLPR if the
setting is already applied to the CLPR.
Are you sure you want to continue this
operation?
WTo continue processing, click [OK]. To
stop processing, click [Cancel].
If a CC pair exists, it may become
suspended depending on the settings
590476810
Are you sure you want to continue this
operation?
Part code 6810 243