HP XP P9500

Table 15 Error codes (part code 00222) (continued)
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
WSet a value within the range.The value that can be input to the
number of retries of authentication server
is 1 to 50.
10533100222
WThis is a compulsory input item.The base DN of authentication server is
not input.
10533200222
WEnter with 1 to 255 characters.The base DN of authentication server is
too long.
10533300222
WEnter with alphanumeric characters and
symbols( , - . = _ ).
Invalid characters are used in the
specified base DN of authentication
server.
10533400222
WThis is a compulsory input item.The user DN of authentication server for
searching is not input.
10533500222
WEnter with 1 to 255 characters.The user DN of authentication server for
searching is too long.
10533600222
WEnter with alphanumeric characters and
symbols( , - . = _ ).
Invalid characters are used in the
specified user DN of authentication
server for searching.
10533700222
WThis is a compulsory input item.The password of authentication server is
not input.
10533800222
WEnter with 1 to 256 characters.The password of authentication server is
too long.
10533900222
WEnter with alphanumeric characters and
symbols( ! # $ % & ' ( ) * + - . = @ \ ^
_ | ).
Invalid characters are used in the
specified password of authentication
server.
10534000222
WThis is a compulsory input item.The Re-enter Password of authentication
server is not input.
10534100222
WEnter with 1 to 256 characters.The re-entered password of
authentication server is too long.
10534200222
WEnter with alphanumeric characters and
symbols( ! # $ % & ' ( ) * + - . = @ \ ^
_ | ).
Invalid characters are used in the
re-entered password of authentication
server.
10534300222
WEnter the same password.The re-entered password does not match
the one entered previously.
10534400222
WIf you want to enable the secondary
server, disable the setting of DNS
Lookup.
A secondary server cannot be enabled
because DNS Lookup of authentication
server is enabled.
10534500222
WIf you want to select LDAP over SSL/TLS
for protocol, disable the setting of DNS
Lookup.
LDAP over SSL/TLS for protocol cannot
be selected because DNS Lookup of
authentication server is enabled.
10534600222
WThis is a compulsory input item.The primary host name of authentication
server is not input.
10534700222
WEnter with 1 to 255 characters.The primary host name of authentication
server is too long.
10534800222
WEnter with alphanumeric characters and
symbols( - . ).
Invalid characters are used in the
specified primary host name of
authentication server.
10534900222
WThis is a compulsory input item.The primary port number of
authentication server is not input.
10535000222
28 Message (part code group 0nnn)