HP xw4300 Quickspecs

48X CD-ROM Drive Form Factor 5.25-in, half-height, tray load
Mounting Orientation Horizontal or vertical
Interface ATAPI/EIDE
Dimensions (HxWxD) 1.63 x 5.83 x 7.27 in (4.13 x 14.6 x 18.5 cm)
Weight 1.76 lb (0.8 kg)
Data Transfer Rates -
Read
Digital audio extraction (minimum) – 1,200 KB/s (8X)
CD read – up to 7,200 KB/s (48X)
Media and Formats - Read CD Media stamped, CD-R, CD-RW (LS, HS, US)
CD Capacities 180 MB (mode 2, 8 cm); 540 MB (mode 1, 12 cm);
650 MB (mode 2, 12 cm); 700 MB (Mode 2, 12 cm,
80-minute)
CD Formats CD-DA, CD-ROM (Mode 1 and 2), CD-XA (Mode 2,
Form 1 and 2), Photo CD (Single and Multi-
session), Mixed Mode (Audio and Data combined),
CD-I (Mode 2, Form 1 and 2, and CD-I Ready), CD-
Extra, CD-Bridge, Video CD
Access Times
(typical reads, including
settling)
CD-ROM Mode 1 < 125 ms
Full Stroke CD < 210 ms
Start-up Time (typical) < 7 s (single session), < 30 s (multi-session)
Stop Time (typical) < 4 s
Write Buffer Size 128 KB (minimum)
Data Transfer Modes PIO Mode 4 (16.6 MB/s); Multi-word DMA mode 2
(16.6 MB/s); UltraDMA Mode 0 (16.7 MB/s);
UltraDMA Mode 2 (33.3 MB/s)
Power Source Four-pin, DC power receptacle
DC Power Requirement 5 VDC ± 5% - 100 mV ripple p-p
12 VDC ± 5% - 200 mV ripple p-p
DC Current 5 VDC - <1000 mA typical,
< 1600 mA maximum
12 VDC - < 600 mA typical,
<1400 mA maximum
Total Drive Power
(standby mode)
< 2.5 Watt
Audio Output Line-Out 0.7 VRMS
Signal-to-Noise Ratio 74 dB
Channel Separation 65 dB
Configuration Jumper
Block
Master, slave, and cable select modes
Operating Conditions
(all conditions non-
condensing)
Temperature 41° to 122° F (5° to 50° C)
Humidity 10% to 80%
QuickSpecs
HP xw4300 Workstation
Technical Specifications - Optical Devices
DA - 12260 North America — Version 23 — May 25, 2007 Page 56

HP xw4300 Specifications

General

Brand	HP
Model	xw4300
Category	Desktop
Language	English