HP xw4300 - Page 61

CD Formats: CD-DA, CD-ROM (Mode 1 and 2), CD-
XA (Mode 2, Form 1 and 2), Photo CD (Single and
Multi-session), Mixed Mode (Audio and Data
combined), CD-I (Mode 2, Form 1 and 2, and CD-I
Ready), CD-Extra, CD-Bridge, Video CD
Write Methods Disc-at-once, session-at-once, track-at-once,
incremental fixed and variable packet, multi-
session
Access Times
(typical reads, including
settling)
Random DVD < 140 ms
Random CD < 125 ms, (typical)
Full Stroke DVD < 250 ms
Full Stroke CD < 210 ms
Startup Time (single) < 7 seconds (typical)
Startup Time (multi-
session)
< 30 seconds (typical)
Stop Time (typical) < 4 s
Cache Buffer 2 MB (minimum)
Data Transfer Modes ATA PIO mode 4 (16.7 MB/s); ATA Multi-word DMA
mode 2 (16.7 MB/s); ATA UltraDMA Mode 3 (44
Mbytes/s)
Power Source Four-pin, DC power receptacle
DC Power Requirement 5 VDC ± 5%-100 mV ripple p-p
12 VDC ± 5%-200 mV ripple p-p
DC Current 5 VDC (< 1000 mA typical, < 1600 mA maximum)
12 VDC (< 600 mA typical, < 1400 mA maximum)
Total Drive Power
(standby mode)
< 2.5 Watt
Audio Output Line-Out 0.7 VRMS
Signal-to-Noise Ratio 74 dB
Channel Separation 65 dB
Configuration Jumper
Block
Master, slave, and cable select modes
Data Interface Connector 40-pin, shrouded and keyed, flat ribbon
Operating Conditions
(all conditions non-
condensing)
Temperature 41° to 122° F (5° to 50° C)
Relative humidity 10% to 90%
Maximum wet bulb
temperature
86° F (30° C)
Certifications, Approvals MMC-3 support, multi-read compliant, Microsoft WHQL certification, ACA
AS/NZS 3548 class B, BSMI CNS 13438, CE Mark, C.I.S.P.R. Pub 22, TUV or VDE
EN60950, EN 55022, EN55024, EMKO EN60950, EN 60825-1, UL 60950, CSA
C22.2 60950-2000, CFR 21 part 1040 class 1, CFR 47 C.I.S.P.R. Pub 22 Class B,
DHHS/FDA, ANSI C63.4-1992 (FCC Class B)
QuickSpecs
HP xw4300 Workstation
Technical Specifications - Optical Devices
DA - 12260 North America — Version 23 — May 25, 2007 Page 61